Create and assign a Training Plan program
Order training plans, gate each one on the plan before it, and run a scheduled certification window.
A program puts several training plans in the order learners take them. You assign the whole program in one action. Each plan can open at the start, open after an earlier plan is passed, or run in a scheduled window, such as a live certification. You build the program once, and pick the dates each time you assign it, so different groups can take it on different schedules.
Before you start
- Programs are available to Org Admins. Team admins don't see the Programs tab.
- Programs are turned on for one organization at a time. If you don't see the Programs tab in Training Plans, ask your Customer Success Manager to turn it on.
- Build and activate the training plans first. A program uses training plans that already exist; it doesn't create new ones.
Example used in this article
This article builds a three-plan onboarding program:
- Discovery Foundations opens when the program starts.
- Objection Handling opens after the learner passes Discovery Foundations.
- Annuity Advisor Certification runs in a scheduled window that you pick when you assign the program.
Step 1: Start a new program
- Go to Training Plans and select the Programs tab.
- Select Create Program. The Create Program dialog opens.
- Choose where the program starts from (options below).
- Enter a name in the Program name field.
- Select Continue. The guided setup opens. The program name stays at the top of every setup screen.
Where a program can start from:
- Blank: an empty program. You add the plans on the next screen.
- From a Template: a program template your organization saved. See Save a program as a template.
- From selected plans: the plans you selected in All Training Plans, in the order you selected them.
- From a folder: every plan in a folder. A folder has no order, so the plans arrive alphabetically. Put them in teaching order on the next screen. Plans added to the folder later are not added to the program.
- Clone a program: a copy of an existing program.
To start from plans you already picked, go to All Training Plans, select two or more plans, then select Create program from selection. The dialog opens on From selected plans and lists the plans in the order you selected them. Every plan after the first opens when the one before it is passed. You can change that in the setup.
Step 2: Add the plans in order
- Select Add training plans. The Add training plans panel opens.
- Tick each plan learners take, in the order they take it. Use Search plans by name or the Folder filter to find plans.
- Select Add [number] plans.
- To change the order, drag a card or use its arrows. Learners move through the plans from left to right.
- Select Next.
A training plan can appear only once in a program. Archived plans can't be added.
Step 3: Choose when each plan opens
The setup asks When can learners start each plan?
- All at the start: every plan is available as soon as the program starts.
- One after another: each plan opens when the one before it is passed.
- I'll set each one: you choose an opening rule on each plan card.
When you select I'll set each one, each card offers these rules:
- When the program is started
- When the previous plan is passed
- When a particular earlier step is passed. You can require one or all of the steps you name.
For the example program, select I'll set each one, then set:
- Discovery Foundations: When the program is started
- Objection Handling: When the previous plan is passed
- Annuity Advisor Certification: When the program is started
A plan opens only when the learner passes the plan it waits on. Completing a plan without passing it keeps the next plan locked. A learner can retake the plan, and the next plan opens on the first pass.
Step 4: Mark the plans that run in a scheduled window
The setup asks Are any plans available only during a scheduled window, like a live certification? A window plan opens and closes at a set date and time, and is due when it closes.
- Select Yes.
- Under Which plans?, select each window plan. In the example, select Annuity Advisor Certification.
- Select Next.
You don't enter dates here. You pick each window's dates and times when you assign the program.
Step 5: Choose what happens when a due date passes
The setup asks When a plan's due date passes, what happens?
- Learners can still finish. Late work is marked late.
- The plan closes. Learners can't start it.
- I'll set each one: choose for each plan.
Window plans always close when their window ends.
Step 6: Review and save
The Review step shows each plan and when it opens. It reminds you that you pick the dates when you assign people.
- Check each plan. You can change any setting on this screen before you save.
- Select Save program.
The program page opens with two tabs, Plans and People. The Plans tab summarizes the setup; select Edit setup or change a card, then select Save.
Step 7: Assign the program
On the program page, open the ⋮ menu and select Assign, or select Assign people on the People tab. The Assign program panel opens with four steps: People, Start, Dates and Review.
People
Select the learners. Use search and filters to find them, then select Next. You can assign up to 2,000 learners at once.
Start
Under When does this group start?, set the Start date and time. Check the line "Times are in [timezone]." It defaults to your browser's timezone. Select Change to pick another.
Dates
The step asks When is each plan due? For each plan, choose:
- On a date: pick the due date, and add a time if you need one.
- Days after it opens: the plan is due that many days after it opens for each learner. Use this for plans that open when an earlier plan is passed.
- No due date.
If the plan closes when its due date passes (Step 5), the card shows when it closes. To keep it open longer, set it to close a number of days after it is due.
For a window plan, turn on Scheduled window and pick its Opens and Closes date and time. It is due when the window closes.
Review
Check the dates for this group. The table shows each plan, when it opens, its due date and its state. Select Change on a row to adjust it. Changes here apply to this group only.
If some of the selected people already hold a plan in this program, the step says so. Those learners start with more plans open than the table shows.
If any plan in the program is inactive, the step lists it and selects Make these plans active when I assign by default. Learners don't get reminders and don't appear in analytics for inactive plans.
Select Assign to [number] people. The assignment runs in the background, and you can close the panel while it runs. If it stops partway, select Run it again. People already assigned are skipped.
What learners see
- Learners get an email and an in-app notification only for the plans that open right away.
- A locked plan sends no email and doesn't count as overdue until it opens.
- When a locked plan opens, the learner gets a notification with the plan name and its due date.
- A learner who opens a locked plan sees what to pass first, for example "Pass "Discovery Foundations" first."
- After a plan closes, the learner can no longer start practice in it. Their scores and recordings stay.
Track a program
The program's People tab shows each group's start date and counts. Below that it lists each learner with their Start date, Plans passed (for example "1 of 3"), Status (Completed or Not completed) and the date the program Ends.
To move a group's dates, select Change dates on the group's row. See Change the dates for a program group.
For section-level progress and scores, open each plan's Analytics tab. A plan that is still waiting on an earlier plan shows a Locked chip next to the learner's due date. See Training Plan Analytics.
Assign the same program to another group
Assign the program again with a different start date and different dates. In the example, one group can take the certification in November and the next group in December.
Add people to a group that already started
To add a late joiner to a group, assign the program to them and choose Add them to the group that starts [date] in the People step. They get that group's dates; no one else's dates change. The Start and Dates steps are skipped.
A plan set as due a number of days after it opens counts from when it opens for the new person, not for the group.
If a plan's due date or close has already passed for the people joining, the Review step lists it. For each one, choose:
- Change: pick a new due date for the people joining. It can be up to 365 days out.
- Keep the group's date: they get the group's date, which has already passed.
You can't assign until you've chosen for every plan listed.
Change a program after people are assigned
You can edit the Plans tab at any time. Changes to the plans don't reach people already in the program:
- Adding a plan doesn't give it to people already assigned. To give it to them, assign the program to them again. They stay in their group and get only the plan they're missing.
- Removing a plan isn't allowed while learners are on it. Unassign them from the program first.
See or restore an earlier version
Select the clock button (Version history) on the Plans tab to see the program's earlier versions: its name, its plans and their rules. Save or discard your edits first. Select a version, then Restore; you see what changes before you confirm.
Restoring changes the program's plans and rules only. Groups, their people and their dates stay as they are.
Save a program as a template
- Open the program's ⋮ menu and select Save as template.
- Enter a Template name. The Plans list shows each plan and whether it is saved as an Existing template or a New template.
- Under Dates, choose whether to keep the dates from one of the program's groups.
- Select Save template.
Program templates appear on the Templates tab. Use the filter at the top (All, Training plans, Programs) to find them. To build a program from one, open the template's menu and select Create from Template, enter a Program name, then select Create or Create and assign. Dates saved with a template are filled in when you assign; you can change them for each group.
Frequently asked questions
Can I assign a program to someone who already has one of its plans?
Yes. If the learner is already working on or has finished a plan in the program, that plan opens for them. They aren't locked out of work they started.
Can I change one learner's due date after assigning?
Yes. Change it from the plan's Analytics tab, for one learner or for a selected group. That learner then keeps their own dates when the group's dates change.
Can I give a whole group more time?
Yes. Select Change dates on the group's row in the People tab. See Change the dates for a program group.
How do I remove a learner from a program?
Open the program's People tab, open the learner's row menu, and select Unassign from program.
Can I delete a program?
Unassign every learner first. A program with learners on it can't be deleted.